Cisco Systems 8240 Manual De Usuario
2-5
Cisco MGX 8240 Hardware User’s Guide
Release 3.0, Part Number 78-10728-01, July 2000
Chapter 2 Description
Figure 2-3
Slot Designation (Front View)
The PSM slots are numbered 1 through 16 (from left to right) on the bottom of the card cage.
Slot 1:
•
Reserved for common equipment purposes (the IMC card).
•
Divided into two slots (A and B) for the IMC card. These slots are wired in parallel.
•
Provides:
–
Ethernet connectivity for remaining 15 slots.
–
BITS A and B connections for the user.
–
Alarm relay connections for the user.
Slots 2 through 16:
•
Are identical with respect to the PSM cards and Interface I/O Mid-plane.
•
Are wired for Ethernet connections and have point-to-point connection to slot 1.
•
Are coupled to both BITS A and B.
•
Contain alarms relay control signals for four contact closures.
The Mid-plane design:
•
Eliminates most of the discrete wiring within the shelf.
•
Provides connection between the front and back cards.
•
Provides the interconnection for the cards, interface I/O panels, fan tray, and -48 VDC Power Input.
•
Supports hot swapping of cards, Interface I/Os, and fan tray.
•
Has no active circuitry.
I/O Panels are installed in the rear of the chassis. Two types of I/O cards exist:
1.
The PSM I/O, with two OC3 transceivers, three DS3 ports, and an RJ45 CRAFT port.
2.
The IMC I/O card, with 1 Ethernet port, 1 RJ45 console port, and BITS A and BITS B ports, and a
D connector for alarms.
D connector for alarms.
A blank I/O panel is supplied to cover slots that do not contain one of the above cards.