Harbor Freight Tools 44829 Manual De Usuario
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.
Avoid working alone. If an accident happens, an assistant can bring help.
2.
Keep work area clean. Cluttered areas invite injuries.
3.
Observe work area conditions. Don’t expose to rain. Keep work area well
lighted.
4.
Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
5.
Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
children.
SKU 44829
Page 2
REV 09/01
REV 11/01
Motor
120V Single Phase 60HZ 2HP
Watts (input)
1500 Approx.
Rpms
3400
Blade Size
14” (Not Included) 1” Arbor
Miter Angle
0-45 Degrees Rt. 0-30 Left
Weight
35.6 Lbs.
Base Dimensions 18-1/2” x 10-1/2”
Cutting Capacity Up to 4”
Table Size
Cutting Capacity Up to 4”
Table Size
9-3/4” x 10-1/4”
Save This Manual
Specifications
Vise Assembly and Spanner Wrench Included.
Recommend using #525 Cut-off Wheel (not included), 14” Diameter, 1/8” Thick-
ness, 30 Grit. This is an aluminum oxide wheel designed for general purpose
usage. For cutting masonry, recommend #44815 Cut-off Wheel (not included),
14”, 1/8” Thickness.
ness, 30 Grit. This is an aluminum oxide wheel designed for general purpose
usage. For cutting masonry, recommend #44815 Cut-off Wheel (not included),
14”, 1/8” Thickness.
6.
Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically nonconductive clothes and nonskid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.