Cadillac deville 2000 Manual De Usuario

It is possible for the PASS

-

Key III decoder to learn the

transponder value of a new or replacement key. Up to
ten additional keys may be programmed for the vehicle.
This procedure is for learning additional keys only. If all
the currently programmed keys are lost or do not
operate, you must see your dealer or a locksmith who
can service PASS

-

Key III to have keys made and

programmed to the system.

See your dealer or a locksmith who can service
PASS

-

Key III to get a new blank key that is cut exactly

as a current black

-

colored driver’s key that operates the

system. Do not use a gray

-

colored valet key for 

this procedure.

To program the new key:
D Insert the current driver’s key (black in color) in the

ignition and start the engine. If the engine will not
start see your dealer for service.

D After the engine has started, turn the key to OFF, and

remove the key.

D Insert the key to be programmed and turn it to ON

within ten seconds of removing the previous key.

D The SECURITY light will turn off once the key has

been programmed. It may not be apparent that the
SECURITY light went on due to how quickly the
key is programmed.

D Repeat the Steps 1 through 4 if additional keys are to

be programmed.

If you are ever driving and the SECURITY light comes
on and stays on, you will be able to start your engine if
you turn it off. Your PASS

-

Key III system, however, is

not working properly and must be serviced by your
dealer. Your vehicle is not protected by the PASS

-

Key

III system at this time.

If you lose or damage a PASS

-

Key III key, see your

dealer or a locksmith who can service PASS

-

Key III to

have a new key made.