Cisco Systems 4027669 Manual De Usuario

4028103 Rev A

How Do I Install USB Drivers?

To install USB drivers, your PC must be equipped with a USB network interface and
a Microsoft Windows 98SE, ME, 2000, XP, or Vista operating system. This section
contains instructions for installing the USB drivers for the cable modem.

Note: If you are not using the USB interface, skip this section.

Installing USB Drivers

The USB driver installation procedures are different for each operating system.
Follow the appropriate instructions in this section for your operating system.

Installing USB Drivers on Windows 98SE and Windows ME Systems
1 Insert the USB Cable Modem Driver Installation Disk into the CD-ROM drive

of your PC.

2 Wait until the POWER and ONLINE LED status indicators on the front panel of

the cable modem illuminate solid green. The Add New Hardware Wizard
window opens.

3 Click Next in the Add New Hardware Wizard window.
4 Select Search for the best driver for your device (Recommended) in the Add

New Hardware Wizard window, and then click Next.

5 Select CD-ROM drive in the Add New Hardware Wizard window, and then

click Next.

6 Select The updated driver (Recommended) in the Add New Hardware Wizard

window, and then click Next.

7 Click Next in the Add New Hardware Wizard window. The Copying Files

window opens. After 10 to 20 seconds have passed, the Add New Hardware
Wizard window reopens.

8 Click Finish. The USB driver installation is complete.

Installing USB Drivers
1 Insert the Installation CD into the CD-ROM drive of your PC.
2 Make sure the power is connected to your cable modem and that the POWER

LED status indicator on the front panel of the cable modem illuminates solid
green.

3 Connect the USB cable to your computer's USB port. Then, connect the other end

of the USB cable to the USB port on the modem.

4 Click Next in the Found New Hardware Wizard window.
5 Select Search for a suitable driver for my device (recommended) in the Found

New Hardware Wizard window, and then click Next.