Cisco Systems 4027669 Manual De Usuario

Descargar
Página de 32
4028103 Rev A 
 
29 
 
 
Front Panel LED Status Indicator Functions
 
Normal Operations (AC Power applied) 
The following chart illustrates the appearance of the cable modem front panel LED 
status indicators during normal operations when AC power is applied to the cable 
modem. 
Front Panel LED 
Normal Operations 
1
 
POWER 
On 
2
 
DS 
On 
3
 
US 
On 
4
 
ONLINE 
On 
5
 
Link
1
 
ƒ 
On - When a single device is connected to either the Ethernet or the USB 
port and no data is being sent to or from the modem. 
ƒ 
Blinks - When only one Ethernet or USB device is connected and data is 
being transferred between the consumer premise equipment (CPE) and 
the cable modem. 
ƒ 
Off - When no devices are connected to either the Ethernet or the USB 
ports. 
Note: With both Ethernet and USB devices connected to the modem at the 
same time, when data is transferred through only one of the devices 
(Ethernet or USB), the LED illuminates continuously. Whenever data is sent 
through both data ports (Ethernet and USB), the LED blinks as described 
above. 
1
 The LINK LED is on whenever a PC is connected to the modem, and it blinks to indicate that 
data is being transferred. If the modem provides telephone service only and is not connected to a 
PC, the LINK LED is OFF. 
 
 
Special Conditions 
The following chart describes the appearance of the cable modem front panel LED 
status indicators during special conditions to show when you have been denied 
network access or when a software download is in progress. 
Front Panel LED Status Indicators During Special Conditions 
Front Panel LED  Network Access Denied 
Software Download 
in Progress 
1
 
POWER 
Slow Blinking (Blinks 1 time per second)  On 
2
 
DS 
Slow Blinking (Blinks 1 time per second)  Blinking 
3
 
US 
Fast Blinking (Blinks 4 times per second)  Blinking 
4
 
ONLINE 
Slow Blinking (Blinks 1 time per second)  On 
5
 
Link 
Slow Blinking (Blinks 1 time per second)  On