Morphy Richards ib40616 Manual De Usuario

Your iron has a built in cleaning system

designed to keep the water valve, steam
chamber and steam vents clear of lint and
loose mineral deposits. The ‘jet clean’ should
be operated after each period of ironing.

To operate, ensure that there is little water

in the tank, place the iron on its heel and turn
the temperature control dial to the maximum
setting. Wait for the temperature indicator
light to go out, then unplug the iron and hold
it about 6’’ (150mm) above the sink in the
ironing position. Press the shot of steam
button about 10 times in succession. 

After this cleaning operation, empty out

any remaining water.

To keep the soleplate of your iron clean

and free of limescale, we recommend that
you use one of the gentle chrome, silver or
stainless steel cleaners that are generally
available. Always follow the manufacturers
instructions. To clean off melted man-made
fibres set the iron at 3 dot position and pass
it over a clean piece of cotton which will draw
the deposit off the surface.

In the unlikely event of any man-made

fibre fusing to the soleplate, set the iron at
the 3 dot position and pass it over a clean
piece of cotton which will draw the deposit
off the surface.

Do not use scouring powder or solution as

this could cause damage to the coating.

Allow the iron to cool and wipe over with a

damp cloth and mild detergent, then wipe
with a dry cloth.

If you have any difficulty with your 

appliance, do not hesitate to call us.

We are more likely able to help than the 

store from where you bought it.

Please have the following information 

ready to enable our staff to deal with your 
query quickly.

• Name of the product
• Model number as shown on the underside

of the appliance.

Comfi iron 441375234 Rev 3  31/1/03  11:43 PM  Page 8