ICOM ic-m421 Manual De Usuario

45

7

■ Set mode programming

Set mode is used to change the conditions of the trans-
ceiver’s functions: scan type (normal or priority), scan resume
timer, dual/tri-watch, transceiver’s beep tone, backlight and
LCD contrast.

Available functions may differ depending on dealer setting.

q Turn power OFF.
w While pushing [16•C], turn power ON to enter set mode.
e After the display appears, release [16•C].
r Push [

▲] or [▼] to select the desired item, push [ENT].

t Push [

▲] or [▼] to select the desired condition of the item,

push [ENT].

y Push [

▼] to select “Exit,” then push [ENT] or push [CLR]

to exit set mode and returns to normal operation condition.

Beep tone

Beep

Beep

Scan type

Scan Type

Scan Type

Scan resume timer

Scan Timer

Scan Timer

Dual/tri watch

Dual/Tri

Dual/Tri

Backlight

Backlight

Backlight

LCD contrast

Contrast

Contrast

:Push

:Push

--Set Mode--

˘Scan Type

Scan Timer
Dual/Tri
Beep
Backlight
Contrast
Exit

■ Set mode items

D

D Scan type

The transceiver has 2 scan types: normal scan and priority
scan. Normal scan searches all tag channels in the selected
channel group. Priority scan searches all tag channels in se-
quence while monitoring Channel 16.

D

D Scan resume timer

The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. When ON is selected, the scan
pauses 5 sec. and resumes even if a signal has been re-
ceived on any other channel than Channel 16.

--Set Mode--

Scan Timer

ON

˘OFF

<ENT˘OK>

Scan timer OFF (default)

--Set Mode--

Scan Type
˘Priority

Normal

<ENT˘OK>

Priority scan (default)

!IC-M421-3.qxd  06.5.26 1:44 PM  Page 45 (1,1)