Uniden drx332 Manual De Usuario

3

1.  Unpack the handset, battery pack, and

battery cover. If the battery cover is 
already on the handset, press in on 
the notch and slide the cover down 
and off.

2.  Line up the battery pack connector 

with the jack inside the handset. 
(The battery connector only fits one way.)

3.  Push the battery pack connector in until it clicks into place. 

Tug gently on the wires to make sure the battery pack is 
securely connected.

4.  Place the cover over the battery compartment and slide it 

up into place.

1.  Connect the AC adapter to the 

charger's 

 jack and 

route the cord as shown. (This 
adapter might already be 
connected.)

2.  Plug the other end of the 

adapter into a standard 120V AC power outlet.

3.  Place the handset in the charger with the display facing 

forward. The display on the handset should light up; if it 
doesn't, reseat the handset or try plugging the AC adapter 
into a different outlet.

#