Furuno NAVpilot-500 Manual De Usuario
6. MAINTENANCE & TROUBLESHOOTING
6-6
SYSTEM DATA
You can confirm the current equipment and drive system status.
1. Press the [MENU] key to show the mode menu.
2. Rotate the course control knob to select “SYSTEM DATA”.
3. Press the course control knob to show the system data screen.
1. Press the [MENU] key to show the mode menu.
2. Rotate the course control knob to select “SYSTEM DATA”.
3. Press the course control knob to show the system data screen.
INPUT VOLTAGE:
24.4 V
CONTROLLER ID:
1
DRIVE TYPE:
SOLENOID
BYPASS/CLUTCH:
NON
CONTROLLER TEMP:
43.4 F
FET TEMP.:
24.6 F
MOTOR DRIVE CUR.:
0.0 A
BYPASS/CLUTCH CUR.:
0.0 A
SYSTEM DATA
System data screen
6.4 Clearing
Memories
Memories can be cleared to restore the Navpilot-500 to default settings.
For details, see the Installation manual.
For details, see the Installation manual.