Philips Universal remote control SRP5107 SRP5107/27 Manual De Usuario

12

EN

13

EN

English

6

........................................... thumbs Up/Down. Set your

Thumbs ratings.

  P 4 and P 3 ....................... select previous (4)/next (3)

page in Replay TV guides and

menus.

8

.......................................... skips 30 seconds of a recorded

or delayed show.

9

............................................ turns the subtitles on/off.

........................................... replays the last 7 seconds

(Replay) or 8 seconds (TiVo) of

a program.

............................................ catches you up to the live

broadcast.

 

............................................. repeats current chapter/track.

* TiVo and Replay are registered trade marks of their

respective owners.

3.2   Controlling combo devices

Some combo devices (e.g. TV/DVR, TV/DVD, DVD/DVR,

etc.) have separate buttons on the original remote control to

select the part of the combo device to be controlled.

For example, if your combo device is a DVD/DVR then its

original remote control might have separate DVD and DVR

buttons for selection of the combo part you wish to operate.

The equivalent button functions can be found on your Philips

remote control by using the device selection buttons.

1

  Set up the remote control for each part of the combo as

described in chapters 2.3 and 2.3.2. In this example for

both DVD and DVR.

2

  Press the

device selection

button twice to select the DVD

part of the combo.

  Press the

device selection

 button twice to select the

 DVR part of the combo.

Note

Tip

Caution

Warning!

Danger!

Notes

•   This method can be applied similarly to all combo

devices (TV/DVR, TV/VCR, TV/DVD, etc.) and is

available for all device modes.

•   Note that this feature is not supported by all codes.

3.3  Learning button functions

If you miss certain functions from your original remote

control on the SRP5107, the SRP5107 can learn these

functions. You can store a function under any of the

available buttons, except under the

button. Any

function already stored under a button will be deleted.

The SRP5107 is equipped with one dedicated button for

learning additional functions:

.

1

  Make sure that you have the original remote control at

hand.

2

  Select the desired device

(e.g. DVD). Press the

device

selection button to select DVD.

3

  Place both remote controls

on a flat surface (like a table)

and aim them head-to-head

with about 5 - 10 cm in

between.

4

  Keep the

button and the

button you wish to learn on the

SRP5107 (e.g. the

button)

seconds, until the red Setup light

lights up.

 •   The remote control is now in learn mode.

5

  Press andholdthe button that you wish to learn on the

original remote control until the red Setup light

blinks

twice and then goes out toconfirmthatlearningwas

 •   The remote control has now learned the new

function.

Using

the

univ

ersal

remote

contr

ol

5 sec.

.

2 x

2 x