Viper 160xvl Manual De Usuario

Quick Reference Guide

To arm using your remote

■ To arm the system press

for one second. The doors will lock (if con-

nected). The LED will begin to flash. The vehicle’s horn (if connected)
will honk and the parking lights will flash once to confirm arming.

To disarm using your remote

■ To disarm the system press

for one second. The doors will unlock (if

connected). The vehicle’s horn (if connected) will honk twice and the
parking lights will flash twice.

Disabling the Failsafe

Starter Kill without a transmitter

■ Turn on the ignition. Press and release the Valet button within 10 sec-

onds. The LED will stop flashing and the vehicle should start.

To remote start the vehicle

■ Press

twice within 3 seconds. The parking lights will turn on (if con-

nected) and the vehicle will start and run for the programmed duration.

To enter or exit Valet Mode

■ Turn the ignition to the "ON" position. Turn the ignition back off. Press

and release the Valet button within 10 seconds. The status LED will light
steadily if you have entered Valet Mode. To exit Valet Mode, repeat the
steps above. The LED will turn off when exiting Valet Mode.

To activate Panic Mode

■ Press and hold

for 1.5 seconds.

To activate Timer Mode

■ Press

and

to start the vehicle, and run it for the set duration.

To activate Turbo Mode

■ Park the vehicle and set parking brake. Remove your foot from the brake pedal

and leave the engine running. Press and release the

and

buttons.

To disable the remote start system

■ To disable the remote start, move the shutdown toggle switch to the OFF

position.

Location of Shutdown Switch______________________________

Cut along dotted line and f

old f

or a quick and eas

efer

ence to k

eep in y

our pur

se or w

allet.

✂