Furuno FS-5070 Manual De Usuario

6. MENU OPERATION 

The acknowledgement message may be sent automatically when you receive a message 
which requires acknowledgement. You can also enable or disable it for position, polling and 
test messages. Note that the automatic acknowledge is automatically disabled when RX 
call contains error, as required by law. Further, automatic acknowledge is disabled in case 
of OFF HOOK. 
 
1. Press the #/SETUP key. 
2.  Choose USR SETUP, and push the ENTER knob. 
3. Rotate the ENTER knob to choose AUTO ACK, and push the ENTER knob.   

Default: ABLE

**

 Auto ack setup 

**

COMPLY TYPE

: ABLE

UNABLE REASON :

NO REASON GIVEN

POSITION MESSAGE: OFF

POLLING MESSAGE: ON

TEST MESSAGE: ON

 

UNABLE

Effective when 5/ACK/SQ key is set for "AUTO ACK."
ABLE: Sends ABLE acknowledge automatically.
UNABLE: Sends UNABLE acknowledge automatically.

Note: Automatic acknowledge is automatically disabled 

when RX call contains error, as required by law. 
Further, automatic acknowledge is disabled in case of 
OFF HOOK.

Default: NO REASON

BUSY

EQUIP DISABLE

MODE NOT USABLE

CH NOT USABLE

Sets reason for UNABLE.

Note: This menu is the same as manual 

acknowledgement. EQUIPMENT 
DISABLE is shown in calls when 
EQUIP DISABLE is selected.

Default: OFF

Effective when 5/ACK/SQ key 
is set for "AUTO ACK."
OFF: Disables automatic 

acknowledgement of 
position request.

ON: Enables automatic 

acknowledgement of 
position request.

ON

Default: ON

Effective when 5/ACK/SQ key 
is set for "AUTO ACK."
OFF: Disables automatic 

acknowledgement of 
polling request.

ON: Enables automatic 

acknowledgement of 
polling request.

OFF

Rotate ENTER
knob to choose

Default: ON

Effective when 5/ACK/SQ key 
is set for "AUTO ACK."
OFF: Disables automatic 

acknowledgement of 
test call.

ON: Enables automatic 

acknowledgement of 
test call.

OFF