Furuno FS-5070 Manual De Usuario

8. NBDP PREPARATIONS 

A built-in timer allows you to automatically receive and transmit files. 10 timer programs can 
be registered. To enable timer operation, see section 10-6. 
 

1.  Press the function key F5 and the 2 key to display the Timer Operation Entry screen. 

Create

Change

Timer Operation Entry

Timer Operation List

Timer Operation Set Up

 : _ 

Station        :

Start Time     :  0: 00: 00

Stop Time      :  0: 00: 00

Receive/Send   : Receive Send

File to Send   :

Press [

→] to show station list, file list.

2.  If Create is not underlined, press 

→, ↑ and the Enter key to underline it. 

3.  Operation is selected. Enter a suitable operation name on the Operation line. Any 

alphanumeric characters may be used. 

Note: If the operation name entered already exists, the display “Operation 

name already exists. Press any key to escape.” Press any key and 
change the operation name. 

4. Press the 

↓ key to choose Station.   

5. Press the 

→ key to display the Station List (which you registered stations in the previous 

paragraph.)  

6.  Choose a station and press the Enter key. 
7. Press the 

↓ key to choose Start Time. Enter start time, in 24-hour notation. To have the 

operation start at 8:35 a. m., for example, the keying sequence would be; 
0      8      3      5      0      0 

8. Press the 

↓ key to choose Stop Time. Enter stop time, in 24-hour notation. 

9. Press the 

↓ key to choose Receive/Send. Choose operation category; Receive or Send. 

If you have chosen “Send,” go to step 10. For “Receive,” go to step 12. 

10. For send, insert the floppy disk which you want to send in the floppy drive, press the 

↓ 

key to choose File to Send. 

11. Press  the 

→ key to display the TX window, choose a file, and press the Enter key twice. 

12. Press  the  Enter key. 
13. Press  the  Enter key. The operation name appears in the Timer Operation List.   
14. To enter another timer program, press the Enter key twice and the repeat steps 3-11. 
15. Press  the  Esc key to finish.