Konica Minolta di1610 gdi um 1.1.0 Manual De Usuario
Copier Control Panel Operations (PC Print Mode)
4
Di1610 GDI Printer Controller
4-1
4
Copier Control Panel Operations
(PC Print Mode)
This section covers printer operations you can perform on the control
panel of the copier.
panel of the copier.
4.1
Printer Operations
The copier’s default mode is the copy mode. As a general rule, the copier
automatically switches to the PC print mode (indicated by “PC:PRN”
appearing on the copier’s display) and starts printing whenever a print
operation is executed from the connected computer.
automatically switches to the PC print mode (indicated by “PC:PRN”
appearing on the copier’s display) and starts printing whenever a print
operation is executed from the connected computer.
See “Entering and Exiting the PC Print Mode” on page 4-3 for more
information.
information.
4.2
General Guide
2
1
4 5
7
6
4 5
3
Number
Name
Description
1
[Printer] indicator
• Blinks while the copier is receiving print
data.
• Lights while the copier is performing a print
operation (even if data is being received
simultaneously).
simultaneously).
• Goes out when there is no print data.
• See “[Printer] Indicator” on page 4-2.
• See “[Printer] Indicator” on page 4-2.
2
[Printer] key
• Press while the copier is receiving print data
(indicated by the [Printer] indicator blinking)
to enter the PC print mode.
to enter the PC print mode.
• Press while the copier is in the PC print
mode to exit the PC print mode.