Konica Minolta kn-304 Manual De Usuario
Chapter 6 Setup Utility MAP
KN-304 Network Board 6-11
●
Network address
Select [Network Address] from [System] of the [Network Administration menu].
The serial number and MAC address will be indicated.
●
Changing the password
Select [Change Password] from [System] of the [Network Administration menu].
You can change the password. The default (defined at shipment time) is "sysadm".
●
Test printer
Printer test will be sent to the printer.
Enter the password (default is “sysadm”) and click [Start Test].
●
Configure Status Page
You select whether or not network environment information should be printed out at printer
power-on time or restarting of the KN-304.
• If you check [Status Page on Startup], it will be printed when the KN-304’s startup is com-
pleted at power-on time.
• “Execute Immediately” button: Click this button to print out the environment information
immediately.
After selecting, enter the password and click the Set button. Now the new settings are effec-
tive. To cancel the new settings and restore the previous ones, click the Clear button.
●
Printer status
The current printer status will be indicated.
(Example)
Ready
Off line
Warming Up
Self Test
Resetting
Toner Low
Printing
No Error
Idle
Waiting
Energy Saving