ClearOne comm converge 590 Manual De Usuario
CONVERGE 560/590
DATA SHEET
<
>
components
>
SPECIFICATIONS
>
CLEARONE LOCATIONS
Headquarters:
Salt Lake City, UT USA
Salt Lake City, UT USA
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
Tel: 801-975-7200
Toll Free: 800-945-7730
Fax: 801-977-0087
sales@clearone.com
Suite 500
Salt Lake City, UT 84116
Tel: 801-975-7200
Toll Free: 800-945-7730
Fax: 801-977-0087
sales@clearone.com
Latin America
Tel: 801-974-3621
global@clearone.com
global@clearone.com
EMEA
Tel: 44 (0) 1189 036 053
global@clearone.com
global@clearone.com
APAC
Tel: 801-303-3388
global@clearone.com
global@clearone.com
© 2007 ClearOne Communications Inc. All rights reserved. Other product names may be trademarks of their respective owners. Information in this document subject to change without notice. 802-153-560 Rev. 1.7 October 2007.
AUDIO PERFORMANCE
Conditions: Unless otherwise specified,
all measurements are performed with a
22 Hz to 15 kHz BW limit (no weighting)
Conditions: Unless otherwise specified,
all measurements are performed with a
22 Hz to 15 kHz BW limit (no weighting)
Audio Mixer
AEC tail time: 128 ms
Adaptive noise cancellation: (6 – 18 dB)
Gating: Adaptive ambient, 1st mic priority,
look-ahead gating, NOM attenuation
Audio bandwidth: 16 kHz with
videoconferencing or other full-band networks
AEC tail time: 128 ms
Adaptive noise cancellation: (6 – 18 dB)
Gating: Adaptive ambient, 1st mic priority,
look-ahead gating, NOM attenuation
Audio bandwidth: 16 kHz with
videoconferencing or other full-band networks
Microphone Distribution Box
Connection: Female XLR
Maximum Distance from Audio Mixer to Last
Mic Box: 60 ft.
Maximum Level: +17 dBu
Frequency Response: 20 Hz to 14 kHz
THD+N: <0.01% (+14 dBu input @1 kHz)
Phantom Power: 24 V selectable
Impedence: 5 kOhm
Connection: Female XLR
Maximum Distance from Audio Mixer to Last
Mic Box: 60 ft.
Maximum Level: +17 dBu
Frequency Response: 20 Hz to 14 kHz
THD+N: <0.01% (+14 dBu input @1 kHz)
Phantom Power: 24 V selectable
Impedence: 5 kOhm
Line Input
Connection: Unbalanced RCA
Gain: -10 dBu nominal, adjustable from
-14 dB to +18 dB
Nominal Level: -10 dBu
Maximum Level: +9 dBu
Impedance: > 10 kOhm
Connection: Unbalanced RCA
Gain: -10 dBu nominal, adjustable from
-14 dB to +18 dB
Nominal Level: -10 dBu
Maximum Level: +9 dBu
Impedance: > 10 kOhm
Line Output
Connection: Unbalanced RCA
Nominal Level: -10 dBu, adjustable from
-14 dB to +18 dB
Maximum Level: +9 dBu
Frequency Response:40 Hz – 15 kHz (+/-1 dB)
Dynamic Range: > 80 dB
THD+N:< 0.02% (+6 dBu input @ 1 kHz)
Connection: Unbalanced RCA
Nominal Level: -10 dBu, adjustable from
-14 dB to +18 dB
Maximum Level: +9 dBu
Frequency Response:40 Hz – 15 kHz (+/-1 dB)
Dynamic Range: > 80 dB
THD+N:< 0.02% (+6 dBu input @ 1 kHz)
Playback/Record Input
Connection: Unbalanced RCA
Gain: -10 dBu nominal, adjustable from
-14 dB to +18 dB
Nominal Level: -10 dBu
Maximum Level: +9 dBu
Impedance: > 10 kOhm
Connection: Unbalanced RCA
Gain: -10 dBu nominal, adjustable from
-14 dB to +18 dB
Nominal Level: -10 dBu
Maximum Level: +9 dBu
Impedance: > 10 kOhm
Playback/Record Output
Connection: Unbalanced RCA
Nominal Level: -10 dBu, adjustable from
-14 dB to +18 dB
Maximum Level: +9 dBu
Frequency Response:40 Hz – 15 kHz (+/-1 dB)
Dynamic Range: > 80 dB
THD+N: < 0.02% (+6 dBu input @1 kHz)
Connection: Unbalanced RCA
Nominal Level: -10 dBu, adjustable from
-14 dB to +18 dB
Maximum Level: +9 dBu
Frequency Response:40 Hz – 15 kHz (+/-1 dB)
Dynamic Range: > 80 dB
THD+N: < 0.02% (+6 dBu input @1 kHz)
Amplifier Output
Connection: Left and right push terminals
Power: 10 Watts into 8 Ohm load
Impedance: 8 Ohm
Frequency Response:60 Hz – 15 kHz (+/-1 dB)
Dynamic Range: > 80 dB
THD+N:< 0.5% (+5 dBu line input @ 1 kHz)
Output Level:90 dBSPL output @ 1 meter
Connection: Left and right push terminals
Power: 10 Watts into 8 Ohm load
Impedance: 8 Ohm
Frequency Response:60 Hz – 15 kHz (+/-1 dB)
Dynamic Range: > 80 dB
THD+N:< 0.5% (+5 dBu line input @ 1 kHz)
Output Level:90 dBSPL output @ 1 meter
TELEPHONE INTERFACE
Conditions: All measurements taken with
ALC disabled.
Conditions: All measurements taken with
ALC disabled.
Connection: RJ-11 (Set and Line jacks)
Tail Time: 30 ms
Frequency Response: 250 Hz to 3.3 kHz
(+/-1 dB)
THD+N:< 0.2% (+7 dBu line input @1 kHz)
Dynamic Range: > 60 dB
Tail Time: 30 ms
Frequency Response: 250 Hz to 3.3 kHz
(+/-1 dB)
THD+N:< 0.2% (+7 dBu line input @1 kHz)
Dynamic Range: > 60 dB
RS-232 Control Port
DB9 female
9,600/19,200/38,400/57,600
(default)/115,200
Baud rate: 8 bits, 1 stop, no parity
Hardware flow control on (default)/off
DB9 female
9,600/19,200/38,400/57,600
(default)/115,200
Baud rate: 8 bits, 1 stop, no parity
Hardware flow control on (default)/off
Communication I/O
10/100 Ethernet Control Port:
RJ-45 with LED indicators for link,
duplex and activity status.
10/100 Ethernet Control Port:
RJ-45 with LED indicators for link,
duplex and activity status.
USB 1.1 Configuration Port
Slave port
Slave port
Power Supply
Primary Voltage: 100 to 240 VAC
Auto-Sensing, 50-60 Hz
Primary Voltage: 100 to 240 VAC
Auto-Sensing, 50-60 Hz
VISCA Camera Port
DIN, 9600 baud, no Flow Control
DIN, 9600 baud, no Flow Control
Dimensions (W x D x H)
Mixer: 17” x 7.5” x 2”
(43.2 cm x 19.1 cm x 5.1 cm)
Controller: 10.5” x 4.5” x 2.75”
(26.7 cm x 11.4 cm x 6.9 cm)
Mic Box: 4.7” x 5.6” x 1.7”
(11.9 cm x 14.3 cm x 4.4 cm)
Mixer: 17” x 7.5” x 2”
(43.2 cm x 19.1 cm x 5.1 cm)
Controller: 10.5” x 4.5” x 2.75”
(26.7 cm x 11.4 cm x 6.9 cm)
Mic Box: 4.7” x 5.6” x 1.7”
(11.9 cm x 14.3 cm x 4.4 cm)
Weight
Mixer: 4.5 lb (2 kg)
Controller: 2.0 lb (.9 kg)
Mic Box: 1.5 lb (.7 kg)
Mixer: 4.5 lb (2 kg)
Controller: 2.0 lb (.9 kg)
Mic Box: 1.5 lb (.7 kg)
Environmental
Operating Temp: 32-122º F (0-50º C)
Operating Temp: 32-122º F (0-50º C)
Optional Accessories
Go to www.clearone.com to find out more
regarding other conferencing products:
Remote Antenna
Microphones
Roll-About Carts
Go to www.clearone.com to find out more
regarding other conferencing products:
Remote Antenna
Microphones
Roll-About Carts
Part Numbers
910-153-566 Converge 560 with no
910-153-566 Converge 560 with no
controller
910-153-560 Converge 560 with wireless
controller
910-153-565 Converge 560 with wired
controller
910-153-596 Converge 590 with no
controller
910-153-590 Converge 590 with wireless
controller
910-153-595 Converge 590 with wired
controller
910-153-050 Converge Remote Antenna
Accessory Kit
Call 1-801-974-3641 or visit www.clearone.com
for international part numbers.
for international part numbers.
AUDIO MIXER
Provides advanced audio processing for
superior sound quality. Can be placed on a
tabletop, credenza, or in a standard
equipment rack.
Provides advanced audio processing for
superior sound quality. Can be placed on a
tabletop, credenza, or in a standard
equipment rack.
+ ClearOne audio technologies: Distributed
Echo Cancellation®, Noise Cancellation,
First Mic Priority, Look-Ahead Gating,
ClearEffect™, Adaptive Modeling, Chairman
Override Mode
+ Single speaker zone sound distribution
allows amplification of presenter’s voice in
near-end room
+ Camera control: Camera presets
triggered by microphone activation with
video conferencing
Echo Cancellation®, Noise Cancellation,
First Mic Priority, Look-Ahead Gating,
ClearEffect™, Adaptive Modeling, Chairman
Override Mode
+ Single speaker zone sound distribution
allows amplification of presenter’s voice in
near-end room
+ Camera control: Camera presets
triggered by microphone activation with
video conferencing
TABLETOP CONTROLLER
Wireless or wired controller provides intuitive
interface that emulates a telephone keypad.
Converge 560/590 also available without
controller included, so system can be used
with 3rd party control systems such as AMX
or Crestron.
Wireless or wired controller provides intuitive
interface that emulates a telephone keypad.
Converge 560/590 also available without
controller included, so system can be used
with 3rd party control systems such as AMX
or Crestron.
RACK KIT
Allows microphone distribution boxes to be
mounted in a standard equipment rack.
Allows microphone distribution boxes to be
mounted in a standard equipment rack.
MICROPHONE DISTRIBUTION BOX
Converge 560 - two boxes. Converge 590 -
three boxes. Each box contains three industry-
standard XLR microphone connectors. Boxes
are daisy-chained from mixer using standard
RJ-45 cables. Boxes can be rack-mounted with
mixer or strategically positioned throughout
room to minimize microphone cable runs.
Converge 560 - two boxes. Converge 590 -
three boxes. Each box contains three industry-
standard XLR microphone connectors. Boxes
are daisy-chained from mixer using standard
RJ-45 cables. Boxes can be rack-mounted with
mixer or strategically positioned throughout
room to minimize microphone cable runs.
CONFIGURATION & DEVICE
MANAGEMENT SOFTWARE
Customize the audio settings and configure
system via the built-in USB or Ethernet
connection with drag-and-drop user interface.
+ Device Toolbox: Pre-configured audio
settings for common auxiliary devices,
such as video codecs and microphones
+ System Check: Verify Converge 560/590
components
+ Event Logging: Track system events
+ Network Find: Connect to other Converge
560/590 units
+ Firmware Upgrades: Update system
remotely
MANAGEMENT SOFTWARE
Customize the audio settings and configure
system via the built-in USB or Ethernet
connection with drag-and-drop user interface.
+ Device Toolbox: Pre-configured audio
settings for common auxiliary devices,
such as video codecs and microphones
+ System Check: Verify Converge 560/590
components
+ Event Logging: Track system events
+ Network Find: Connect to other Converge
560/590 units
+ Firmware Upgrades: Update system
remotely