Fagor nc-200 pb Instruccion De Instalación

These NC's have a number of installation parameters to configure it for a
particular application.

These parameters may be saved into a peripheral or uploaded from it through
the RS-232-C serial communications line.

The format for these parameters depends on whether they are general or
particular for each axis.

. If it affects the axes, press the corresponding axis key to modify it.

. If it is a general parameter, the X display will show its current value.

. The LCD display will show the description of the parameter and its number.

There are several kinds of parameters depending on how to set them:

· Binary values (1/0) are displayed in an 8-digit row identified as 1 through 8

from right to left.

Their state changes by pressing their associated number key 

  to 

 .

· With decimal values, select the axis and key in the value.

· Options, the value is selected by pressing  

 which will show the various options

in a rollover way.

· Simulated key code, by accessing the corresponding key.