National Instruments FP-QUAD-510 Manual De Usuario
FieldPoint™, National Instruments™, and ni.com™ are trademarks of National Instruments Corporation. Product and
company names mentioned herein are trademarks or trade names of their respective companies.
company names mentioned herein are trademarks or trade names of their respective companies.
322633B-01
© Copyright 2000 National Instruments Corp. All rights reserved.
March 2000
OPERATING INSTRUCTIONS
FP-QUAD-510
4-Axis, Quadrature Input Module
These operating instructions describe the installation, features, and
characteristics of the FP-QUAD-510. For details on configuring
and accessing the FP-QUAD-510 over a network, refer to the user
manual for the particular FieldPoint network module you are using
with the FP-QUAD-510.
characteristics of the FP-QUAD-510. For details on configuring
and accessing the FP-QUAD-510 over a network, refer to the user
manual for the particular FieldPoint network module you are using
with the FP-QUAD-510.
Features
The FP-QUAD-510 is a FieldPoint quadrature input module with
the following features:
the following features:
•
Four independent 32-bit position counters with individual
Phase A, Phase B, and Index input terminals
Phase A, Phase B, and Index input terminals
•
Velocity measurement capabilities
•
Programmable reset on index mode
•
Sinking inputs, compatible with TTL or differential devices
•
Inputs protected to ±250 VDC
•
Hot plug and play operation
•
2,500 Vrms input-to-output isolation
•
Double insulated for 250 V safe working voltage
Power Requirement
The FP-QUAD-510 is powered via the local backplane bus from
the FieldPoint network module. The FP-QUAD-510 is a
high-power consumption module and requires more than the
nominal power allocated to an I/O module from the network
module. In some applications, this could limit the number of I/O
modules that you can connect to a single network module.
the FieldPoint network module. The FP-QUAD-510 is a
high-power consumption module and requires more than the
nominal power allocated to an I/O module from the network
module. In some applications, this could limit the number of I/O
modules that you can connect to a single network module.