Century Avanta Manual De Usuario

Harness straps must be through slots at or just 
below shoulders.

A Loosen harness straps:

• Pull and hold upper belt tab.

• Pull harness straps out.

B Remove both harness strap loops from 

Splitter Plate on back of car seat.

C Press Tab to release metal Rod and lift Rod

out of Pockets.

D Change harness strap slots.

Make sure harness straps are threaded 
through matching slot of seat pad and 
car seat.  

It may be necessary to remove seat pad 
from top of car seat.

Re-install metal Rod:

• Lift harness straps up over car seat top. 

• Slide metal Rod into side Pockets and

press Rod down below Tab.

IMPORTANT: Harness straps MUST be 
behind metal Rod.

Re-attach harness strap loops to Splitter 
Plate (fig. e):

• Lower the harness straps down over 

metal Rod as shown (fig. e).

• Put right strap loop on Splitter Plate 

first, then attach left strap loop.

• Make sure both strap loops are securely

attached within Splitter Plate hook.

• Make sure straps are NOT twisted.