Casio KL-7400 Manual De Usuario

21 

E

■ FULL+HALF CUT

• FULL+HALF CUT perform a full cut at the end of each label, and a half cut

near the beginning of each label to make the backing paper easier to remove.

For

Sa

le

Fo

rS

ale

■ FULL CUT

• FULL CUT performs a full cut at the end of each label.

• Use this setting when printing on iron transfer tape.

• When using the NARROW and MEDIUM margin settings, this setting

automatically performs a full cut to trim off excess tape.

For

Sal

e

Fo

rS

ale

■ UNCUT

• When UNCUT is selected, the printer does not perform any cut operation

between labels.

• This setting is best when you want to print labels without spaces between

them, which saves label tape.

• Be sure to select UNCUT when printing on magnetic tape and reflective

tape. After printing is complete, press FEED to feed the tape, and then cut it
with a pair of scissors.

For

Sal

e

Fo

rS

ale

For

Sal

e

Fo

rS

ale

Special handling is required when printing on magnetic tape and reflec-
tive tape. Whenever printing on magnetic tape or reflective tape, select
UNCUT as the tape cut mode, and cut the tape using a pair of scissors
as described below.
Important!
• Using the printer's built-in cutter to half cut or full cut magnetic tape or

reflective tape will shorten the service life of the cutter blade, and can
damage the cutter mechanism.
1. Select NONE for the MARGINS setting (page 29), or UNCUT for

the tape cut mode.

2. Print the tape.
3. Press FEED to feed the tape.
4. Use a pair of scissors to cut the tape.