Cisco Systems RV016 Manual De Usuario

Obtain an IP automatically

In the drop-down menus for WAN1 

through WAN7, the WAN Connection 

Type setting features four Internet 

connection types: Obtain an IP 

automatically, Static IP, PPPoE, and 

PPTP. Depending on which connec-

tion type you select, the features 

available on the Network page of 

the Setup screen will differ. Proceed 

to the instructions for the connection 

type you are using.

a

If your ISP says that you are 

connecting through DHCP or a 

dynamic IP address from your 

ISP, then select Obtain an IP 

automatically as the WAN 

Connection Type. If you also 

select Use the Following DNS 

Server Addresses, enter a spe-

cific DNS Server IP Address.

b

Click the Save Settings button, 

and go to Step G.

a

If your ISP says that you are 

connecting through a static or 

fixed IP address from your ISP, 

then select Static IP as the WAN 

Connection Type.

b

Enter the WAN IP Address, Sub-

net Mask Default Gateway 

Address, and DNS Server pro-

vided by your ISP.

Your Internet/WAN Connection Type

From the WAN Setting drop-down 

menu, select how many WAN ports 

you want to use. The default is 2, 

and the maximum number is 7. You 

can also change the number of 

WAN ports using the Port Setup page 

of the Port Management tab. If you 

change the number on this screen, 

then the number on the Port Setup 

screen will change accordingly. 

Make sure the network configuration 

matches the number of WAN port 

settings on this screen.

If you change the number of WAN 

ports, a confirmation message will 

appear. Click the OK button to save 

the new setting. You must save this 

setting before you can click Edit to 

change the settings of any new WAN 

ports. The Connection Type will dis-

play the word “Undefined” if you 

have not changed the WAN settings 

of the selected WAN port.

The WAN Setting table will display the 

WAN port numbers in the Interface 

column and their respective con-

nection types in the Connection 

Type column. Click Edit in the Con-

fig. column to change the WAN set-

tings of the selected WAN port. The 

default Connection Type of WAN1 

and WAN2 is Obtain an IP automati-

cally.

PPTP is a service used in Europe and 

Israel only. IF you are using a PPTP 

connection, check with your ISP for 

the necessary setup information. 

When you are finished, go to Step G.

G

If you haven’t already done so, 

click the Save Settings button. 

Then, close the web browser.

H

Power your cable or DSL 

modem off and back on 

again.

I

Restart or power on your PCs so 

they can obtain the Router’s 

new settings.

J

To test the Router’s settings, 

open your web browser from 

any computer. In the browser’s 

Address field, enter 

www.linksys.com/registration 

and press the Enter key.

Congratulations! The installation of 

the Router is complete.

c

In the DNS Server fields, enter 

the DNS address(es) provided 

by your ISP. You need to enter 

at least one DNS address.

d

Click the Save Settings button, 

and go to Step G.

a

If your ISP says that you are 

connecting through PPPoE or if 

you normally enter a user 

name and password to access 

the Internet, then select PPPoE 

as the WAN Connection Type.

b

Enter the User Name and Pass-

word provided by your ISP.

c

If you select Connect on 

Demand, the PPPoE connec-

tion will be disconnected if it 

has been idle for a period 

longer than the Max Idle Time 

setting. 

d

If you select Keep Alive, the 

Router will keep the connec-

tion alive by sending out a few 

data packets at the Redial 

Period, so your Internet service 

thinks that the connection is still 

active.

e

Click the Save Settings button. 

f

Go to Step G.

RV016-QI-40202NC KL

For additional information or troubleshooting 
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further 
support.

800-326-7114 
(toll-free from US or Canada)

support@linksys.com

http://www.linksys.com   or

http://support.linksys.com

http://www.linksys.com/support

ftp://ftp.linksys.com

800-546-5797 (800-LINKSYS)

Linksys is a registered trademark or trademark of 
Cisco Systems, Inc. and/or its affiliates in the U.S. 
and certain other countries. Copyright © 2004 
Cisco Systems, Inc. All rights reserved.

Model No.

Static IP

PPPoE

PPTP

J

The Network Setup screen