blue-seal g1100 Manual De Usuario

-30-

Revision 4/F3576

Pilot Injector

1) Remove the side service panel from the

RH side panel (refer 6.2.3).

2) Remove wiring plug from the ignition

control box.

3) Undo the three screws securing the

ignition box to the mounting panel.

1) Gain access to the oven burners (refer

6.2.6).

2) Remove the four screws securing the pilot

burner to the main burner aeration slide.

6.3.15 MAIN BURNER

Figure 6.3.20

3) Slide the pilot burner off the pilot injector

and remove the pilot burner.

4) Remove the nut securing the rear of the

burner.

1) Remove the pilot burner (refer 6.3.13).
2) Unscrew the pilot burner injector.

6.3.14 PILOT BURNER INJECTOR

Figure 6.3.19

3) Clean or replace, and reassemble in

reverse order.

5) Remove the burner by lifting at the rear

and sliding off the main burner injector.

6) Replace and reassemble in reverse order.

Figure 6.3.21

1) Remove the main burner (refer 6.3.15).
2) Unscrew the burner injector.

6.3.16 MAIN BURNER INJECTOR

Figure 6.3.22

3) Clean or replace, and reassemble in

reverse order.

Burner Injector

6.3.17 IGNITION CONTROL BOX

Three screws

Figure 6.3.23

4) Replace and reassemble in reverse order,

ensuring all wires are correctly fitted.

6.3.18 GAS SOLENOID VALVE

Units Manufactured from S/N 275353.
1) Remove right hand side panel (refer

6.2.4).

2) Remove wiring plug from valve (refer

figure 6.3.24).

3) Remove flexi-tube from bottom of valve.