Zanussi zwh6121 p Manual De Usuario

Descargar
Página de 23
22
Malfunction
Possible cause
Solution
There is water on 
the floor:
Unsatisfactory 
washing results:
The door will not 
open:
The machine 
vibrates or is 
noisy:
The machine 
makes an unusual 
noise:
Too much detergent or unsuitable 
detergent (creates too much foam) 
has been used.
The drain hose is damaged.
Check whether there are any leaks 
from one of the inlet hose fittings. It is 
not always easy to see this as the 
water runs down the hose; check to 
see if it is damp.
Too little detergent or unsuitable 
detergent has been used.
Stubborn stains have not been 
treated prior to washing.
The correct temperature was not 
selected.
The program is still running.
The door lock has not been released.
There is water in the drum.
The transit bolts and packing have 
not been removed.
The laundry is not evenly distributed 
in the drum.
Maybe there is very little laundry in the 
drum.
The machine is fitted with a type of 
motor which makes an unusual noise 
compared with other traditional 
motors. This new motor ensures a 
softer start and more even distribution 
of the laundry in the drum when 
spinning, as well as increased stability 
of the machine.
Unstable floors eg. wooden floors.
The support feet have not been 
adjusted.
Check the correct levelling of the 
appliance.
Redistribute the laundry.
Load more laundry.
Excessive laundry load.
Check if you have selected the 
correct temperature.
Introduce into the drum less 
laundry.
Wait the end of washing cycle.
Wait about 3 minutes.
Select drain or spin program to 
empty out the water.
Check the correct installation of 
the appliance.
Use commercial products to treat 
the stubborn stains.
Increase the detergent quantity or 
use another one.
Reduce the detergent quantity or 
use another one.
Check the water inlet hose 
connection.
Change it with a new one.