Zanussi zwh6120 p Manual De Usuario

21

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily 
without calling out an engineer. Before contacting your local Service Centre, please carry out the 
checks listed below.

During machine operation it is possible that the

 red Start/Pause pilot light flashes to indicate that 

the machine is not working.

Once the problem has been eliminated, press the

 Start/Pause button to restart the program. If 

after all checks, the problem persists, contact your local Service Centre.

The washing 
machine does 
not start:

The machine 
does not fill:

The machine fills 
then empties 
immediately:

The machine 
does not empty 
and/or does not 
spin:

The door has not been closed. 

The plug is not properly inserted in 
the power socket.

The selector dial is not correctly 
positioned and the 

Start/Pause 

button has not been depressed.

The water tap is closed.

The delay start has been selected. 

Please turn the selector dial and 
press the

 Start/Pause button 

again.

If the laundry are to be washed 
immediately, cancel the delay 
start. 

Open the water tap.

Check the inlet hose connection.

Clean the water inlet hose filter.

Close firmly the door.

Refer to relevant paragraph in 
“water drainage” section.

Check the drain hose connection.

Clean the drain filter.

There is no power at the socket.

Please check your domestic 
electrical installation.

Insert the plug into the power 
socket.

Close firmly the door.

The inlet hose is squashed or kinked. 

The filter in the inlet hose is blocked. 

The drain hose is squashed or kinked. 

The option

 Rinse Hold or  No Spin 

has been selected.

The laundry is not evenly distributed 
in the drum.

Redistribute the laundry.

Disable the option 

Rinse Hold or 

No Spin or select Spin program.

The drain filter is clogged.

The door is not properly closed. 

The end of the drain hose is too low.