Konica Minolta 7013 psc Manual De Usuario

TCP/IP Configuration-44

1. To access the LPD Printers menu, type 2 and press Enter. For a unit at factory 

default, the menu shown below will appear.

2. To change the set of emulations, type 1 and press Enter. The options shown below 

will appear.

3. To delete an emulation, select the number opposite the language listed.  For exam-

ple, type 1 and press Enter to delete PCL. Typing 1 again will again select PCL.

4. From the LPD Printers menu, press 2 to toggle Banners between Enabled/Dis-

abled.

To enable network protocols, at the Main menu type 3 and press Enter. 

You are given the choice of disabling either NetWare or AppleTalk since both network 
OSs are enabled by default. For example, to disable Appletalk, type 2 and press Enter.

When it is necessary to restore factory defaults on your print server, choose 4 on the 
Main Menu and press Enter. All NVRAM stored parameters will be returned to their 
factory default values. The factory default values will not take effect until the Telnet 
program is exited, or, the unit is powered cycled.

LPD Printers

1. Printer 1            PCL PS OTHER
2. Banners             DISABLED

Printer 1                  PCL PS OTHER

1. PCL
2. PS
3. ASCII
4. OTHER