Konica Minolta 7013 psc Manual De Usuario
![Konica Minolta](https://files.manualsbrain.com/attachments/35219ede2c552e8742b3de2ff2e860862a7599e0/common/fit/150/50/c44fe408e3f52ec6eb70851dc1658706f6e810acc0fd6ff6802de7d0c07a/brand_logo.png)
Using MAP or Web Browser-1
3
Using the Management Access Program or a
Standard Web Browser
MAP has the following requirements:
• The Microsoft TCP/IP protocol stack must be installed on this PC. It is not necessary
for the network to support TCP/IP. However, the TCP/IP protocol must be installed
on this PC even if the network does not support it.
on this PC even if the network does not support it.
• A web browser must be installed on this PC. Both Netscape Navigator and Internet
Explorer are supported.
• If the IPX search functions are to be used, then IPX must be installed on this PC.
Both the Microsoft and the NetWare 32-bit stacks are supported.
The Management Access Program (MAP) uses a Windows-based HTML viewer pro-
gram linked with a proprietary bi-directional IPX/IP channel program to allow access
to the Print Server Card's HTML-based monitoring and maintenance capabilities. An
IP Web Browser also provides access to this capability directly. Either program allows
you to:
gram linked with a proprietary bi-directional IPX/IP channel program to allow access
to the Print Server Card's HTML-based monitoring and maintenance capabilities. An
IP Web Browser also provides access to this capability directly. Either program allows
you to:
• Configure your network protocols for the Print Server Card.
• Reset the Print Server Card remotely to either clear an error condition, or return the
print server to its factory default settings.
• Troubleshoot problems in the Print Server Card.
• Enable or disable the status sheet printout.
• Access a context-sensitive help menu that fully explains how to use each Manage-
ment Access Program feature.
Note:
To be able to change parameter values with the Management Access Program or
the Web Browser, you must know the Print Server Card management password.
The factory default password is "
sysadm
".
3.1
Where to Place the MAP Utility
The utility can be installed on any workstation hard drive or network drive.