Konica Minolta 7013 psc Manual De Usuario
NetWare Configuration-24
number. Once you select the Network Interface Card you want to configure, the Print
Server Settings screen appears. This screen lets you set up your version of Novell Net-
Ware for the Network Interface Card. See 4.6.3.2 Setup Novell NetWare.
Server Settings screen appears. This screen lets you set up your version of Novell Net-
Ware for the Network Interface Card. See 4.6.3.2 Setup Novell NetWare.
4.6.3.2 Setup Novell NetWare
The Print Server Settings are shown below. There are two Print Server Settings
screens, which you need to complete to configure the Network Interface Card for
Novell NetWare. Each screen lets you set up your version of Novell NetWare for the
Network Interface Card, including directory and bindery services.
screens, which you need to complete to configure the Network Interface Card for
Novell NetWare. Each screen lets you set up your version of Novell NetWare for the
Network Interface Card, including directory and bindery services.
Field
Description
Enable NetWare Print
Server
Server
Indicates whether the NetWare Network Interface Card has been
enabled.
enabled.
• If the box is not checked, the Network Interface Card has not
been enabled for NetWare. All other fields on the screen will
be shaded.
be shaded.
• If the box is checked, the Network Interface Card has been
enabled for NetWare and you can make entries in the other
fields.
fields.
Print Server Name
Indicates the NetWare print server name which the Network Interface
Card uses to log into NetWare. You can enter a name which does not
already exist in the network directory or server bindery.
The maximum field length is 48 characters.
Card uses to log into NetWare. You can enter a name which does not
already exist in the network directory or server bindery.
The maximum field length is 48 characters.
Print Queue Scan Rate
Specifies the rate at which a Network Interface Card will poll print
queues for a new print job. For example, if you place 1 in the field, the
Network Interface Card should poll for new print jobs every 1 second.
The minimum value for this field is 1 and the maximum is 250.
queues for a new print job. For example, if you place 1 in the field, the
Network Interface Card should poll for new print jobs every 1 second.
The minimum value for this field is 1 and the maximum is 250.
Print Server Password
and Print Server
Password Retype
and Print Server
Password Retype
Indicates the password for a Network Interface Card which will be used
to log into NetWare. When you change this field, NWSetup will set the
password in both NetWare and the Network Interface Card.
The maximum length for this field is 32 characters.
Both the Password and Password Retype fields must be identical before
a user is allowed to Finish this screen.
to log into NetWare. When you change this field, NWSetup will set the
password in both NetWare and the Network Interface Card.
The maximum length for this field is 32 characters.
Both the Password and Password Retype fields must be identical before
a user is allowed to Finish this screen.
Ethernet Frame Type
Indicates the Ethernet frame type that should be used by the NetWare
protocol stack by default. Only one frame type can be selected.
protocol stack by default. Only one frame type can be selected.