Konica Minolta 7013 psc Manual De Usuario

TCP/IP Configuration-8

You can also use the HTML pages accessible via MAP or a Web Browser to set up lpr. 
The password to change parameters with the HTML pages is the same as the Telnet 
password.

Once you install the spooler onto the workstation; the setup program will create a 
group and icon.

1. Double click on the spooler icon.

2. Click on setup, define new queue. 

3. At the Remote Host Name prompt enter the Print Server Card's IP Address, and 

for the Remote Printer Name enter PORT1. 

4. Go to Settings.

5. Select Printers.

6. Choose Add Printer.

7. Click on Next.

8. Select your driver and click on Next.

At this point, you should see an entry for your Windows lpr Spooler's printer in the 
"Available Ports" listing. For example,  C:\SPOOL\PRINTER_NAME.

Windows NT (version 3.5 or higher) does come with TCP/IP and lpr capabilities, 
although these must be installed when the unit is configured. You must install the 
TCP/IP Protocol, Simple TCP/IP Services, and Microsoft TCP/IP Printing prior to 
entering the network printer on the workstation. 

Note:

Once you have lpr installed on an Windows NT Server workstation and have 

allowed printer sharing, other workstations may use the printer through the Microsoft 

Windows Network without having to have separate lpr queues installed on each work-

station.

Note:

If you wish to use BOOTPL,  you will need the BOOTPL32.EXE file. This file is 

in the BOOTP directory on the CD ROM which comes with the Print Server Card.