Konica Minolta 7013 psc Manual De Usuario
TCP/IP Configuration-11
1. Telnet to the Print Server Card (the login and password are both "sysadm").
2. Turn off the protocols that you are not utilizing (option 3).
3. Setup the subnet mask and default gateway for the Print Server Card if applicable
(option 1).
4. Exit, Save, and Reset the Print Server Card
You can also use the HTML pages accessible via MAP or a Web Browser to set up lpr.
The password to change parameters with the HTML pages is the same as the Telnet
password.
The password to change parameters with the HTML pages is the same as the Telnet
password.
7.1.3.5 Setting up
lpr
on the Workstation
The following procedure is used to set up the lpr spooler on the Windows NT server.
1. Open Control Panel.
2. Go to Printers.
3. Choose Printer Menu.
4. Choose Create Printer.
5. Enter a printer name (For example, lprprinter).
6. Select the proper printer driver.
7. Enter a description. This is optional.
8. In the Print To dialog, choose Other.
9. In Print Destinations window, select lpr port. This leaves you with add lpr
compatible printer window.
Line 1: Address of host providing
lpd
(Print server);
enter IP address.
Line 2: Name of printer on that machine - enter PORT1
(the word PORT
MUST
be in uppercase).
10. Choose OK to exit.
Your Print Server Card is now configured to operate Windows NT. You may print from
any application by the following the normal print instructions for that application.
any application by the following the normal print instructions for that application.