Konica Minolta 7013 psc Manual De Usuario
TCP/IP Configuration-18
Between the host-based and printer-based TCP/IP printing capabilities, the Print
Server Card works with:
Server Card works with:
• All UNIX systems that support lpd/lpr
• System V Rel. 4 (on 386 platforms)
• DEC ULTRIX RISC Versions 4.3 and 4.4
• DEC OSF/1 Versions 2.0 and 3.0
• Solaris:
Version 1.1.3 (SunOS 4.1.3),
Version 2.3 (SunOS 5.3),
Version 2.4, and
Version 2.5
Version 2.3 (SunOS 5.3),
Version 2.4, and
Version 2.5
• HP-UX Series 700 and 800 Version 9.01 and Version 10.0
• IBM AIX Version 3.2.5
• SCO UNIX Version 3.2
• AS400
The TCP/IP directory also includes source code that you can recompile into host-
based code for configuring on other System V platforms.
based code for configuring on other System V platforms.
7.5.1 Configuring the IP Address on the Print Server Card
Regardless of the printing mode selected, the Print Server Card must be given IP
address and routing parameters. You can configure the IP address for the Print Server
Card in one of the following ways:
address and routing parameters. You can configure the IP address for the Print Server
Card in one of the following ways:
• Use MAP, as described in Chapter 3.
• Use AppleTalk NIManage utility program, as described in Chapter 6.
• Use the Internet Boot Protocol (BOOTP).
• Use the reverse ARP (rarp) capability (Ethernet II frame type only).
• Use arp and ping capability.
For each method, you will need to provide the Ethernet address of the Print Server
Card. The Ethernet address is the 12-character code that is printed under Network
Address on the configuration status report each time the printer is turned on.
Card. The Ethernet address is the 12-character code that is printed under Network
Address on the configuration status report each time the printer is turned on.