Konica Minolta k8020 Manual De Usuario
1.2 Available Features
1
Konica 8020/8031
1-5
B
e
fo
re
Ma
ki
ng C
opi
es
Ch
apte
r 1
Output Settings
Stapling
Copies are stapled together before they are output.
Stapling is only available if the optional finisher (FS-135 or FS-231) is
installed.
installed.
Hole-punching
Holes are punched in copies before they are output.
Hole-punching is only available if the punch kit (PK-131) is installed
in the optional finisher (FS-231).
in the optional finisher (FS-231).
Zoom Settings
Auto Size
G
This setting automatically selects the most appropriate zoom ratio based on the
size of the document loaded and the specified paper size.
size of the document loaded and the specified paper size.
Full Size
G
This setting makes a copy that is the same size as the document (
× 1.000).
Enlarged copies
G
Zoom settings for making enlarged copies from common standard document
sizes to standard paper sizes are available.
sizes to standard paper sizes are available.
❍
Example 1: An A4-size document can be copied onto the larger A3-size pa-
per.
per.
❍
Example 2: An A4-size document can be copied onto the larger B4-size pa-
per.
per.
Reduced copies
G
Zoom settings for making reduced copies from common standard document siz-
es to standard paper sizes are available.
es to standard paper sizes are available.
❍
Example 1: An A3-size document can be copied onto the smaller A4-size pa-
per.
per.
❍
Example 2: A B4-size document can be copied onto the smaller A4-size pa-
per.
per.
Minimal
G
This setting slightly reduces the copy (
×0.930).
❍
Selecting the “Minimal” setting ensures that any part of the original positioned
at the edge of the page will not be cut off in the copy.
at the edge of the page will not be cut off in the copy.
Zoom copies
G
Any zoom ratio (between
×0.250 and ×4.000) can be specified.
❍
Touch
and
to specify the desired zoom ratio.