National Instruments SCXI -1125 Manual De Usuario

© National Instruments Corporation

•

The SCXI Quick Start Guide—This document contains a quick 
overview for setting up an SCXI chassis, installing SCXI modules and 
terminal blocks, and attaching sensors. It also describes setting up the 
SCXI system in MAX.

•

The SCXI hardware user manuals—Read these manuals next 
for detailed information about signal connections and module 
configuration. They also explain, in greater detail, how the module 
works and contain application hints.

•

Accessory installation guides or manuals—If you are using accessory 
products, read the terminal block and cable assembly installation 
guides. They explain how to physically connect the relevant pieces 
of the system. Consult these guides when you are making the 
connections.

•

The E/M Series DAQ device documentation—This documentation has 
detailed information about the E/M Series DAQ device that plugs into 
or is connected to the computer. Use this documentation for hardware 
installation and configuration instructions, specification information 
about the E/M Series DAQ device, and application hints.

•

Software documentation—You may have both application software 
and NI-DAQ software documentation. National Instruments (NI) 
application software includes LabVIEW, LabWindows/CVI, and 
Measurement Studio. After you set up the hardware system, use either 
your application software documentation or the NI-DAQ 
documentation to help you write your application. If you have a large, 
complex system, it is worthwhile to look through the software 
documentation before you configure the hardware.

•

One or more of the following help files for software information:

–

–

–

•

NI application notes or tutorials—NI has additional material on 
measurements available at 

ni.com/support

.

You can download NI documents from 

ni.com/manuals

. To download 

the latest version of NI-DAQ, click Drivers and Updates at 

ni.com

.