Black Box KV1416A-R2 Manual De Usuario

®

In use, cascaded servers can be accessed using exactly the same methods as for 
those connected directly to the ServSwitch CX. However, by far the easiest way 
is to use the on screen menu. This is because it displays the server names and 
does not require any knowledge of port addresses, some of which (as discussed 
above) can be up to six digits long. See the 

in the Operation chapter for more details.

As mentioned previously, the best and most efficient way to access cascaded 
servers is by using the on screen menu and via non-specific routes through the 
link groups. However, during configuration or troubleshooting, it may be useful 
to test specific routes to servers in order to verify the various strands of each 
link group. By using specific port addresses for each unit, rather than link group 
numbers, you can precisely navigate a route through any part of the system.

1  Simultaneously press and hold 

 and 

.

2  While still holding 

 and 

, in sequence, press and release the full 

address of the required server – remember to use specific port numbers, not 
link group addresses, e.g. 061802, not 424502.

3  When the last digit has been entered, release all keys.