Black Box KV1416A-R2 Manual De Usuario

®

If the ADMIN password becomes mislaid or forgotten, you will not be able to 
access the ServSwitch CX to add or edit users and server names. This situation 
may be resolved by performing a complete reset to return the ServSwitch CX  or 
CX with IP to its factory default state. 
IMPORTANT: A complete reset erases all the user names and server names 
that you have setup. 
Slightly different procedures are used to reset the ServSwitch CX and the 
ServSwitch CX with IP, as detailed here.  

1  Remove all power inputs from the ServSwitch CX unit.
2  Move switch 

 on the rear panel down to the ON position.

3  Press and hold the front panel 

USER

 and 

COMPUTER

 buttons while you re-

apply power. On the local user port, a screen menu will indicate that the unit 
has been reset and will prompt you to power down and return the switch to 
its normal position.

4  As directed, remove power and move switch 

 up to its OFF position.

5  Power up and configure the unit in the normal manner.

1  Remove all power inputs from the ServSwitch CX with IP unit.
2  Move switch 

 on the rear panel down to the ON position.

3  Re-apply power to the unit. On the local user port, a screen menu will 

provide two options. 

4  Using the local keyboard or mouse, select the ‘Reset Configuration’ option. 

A warning screen will be displayed, select the RESET option and press 

. 

The unit will reset and then prompt you to work through the 

.

5  After you have completed the initial IP configuration, remove power and 

move switch 

 up to its OFF position.