Nero wave editor Guía De Instalación Rápida

••••

3.  Choose a presetting by clicking on the dropdown button and highlighting the 

desired list box field or determine the delay or feedback yourself by turning 
the appropriate knob and change the signal and the effect with the sliders. 

 

Click on the 

button to play back the audio file with the changes stated. This 

allows you to check straightaway that you are happy with the results. 

4.  Click on the 'OK' button to take over the changes. 

The flanger creates unusual sound effects through variable modulation and 
mixing. The effect is caused by the change in the time delay. Using the flanger, 
the original is mixed together with a signal that has been modulated (changed in 
pitch). This signal is sometimes slower or sometimes faster than the original. 
Pleasant stereo effects can be created if the signal then switches from "left" to 
'right' and back again. 

1.  Open the desired file. 

2.  Select the 'Flanger' command in the 'Effects' menu. 

 

3.  Choose a presetting by clicking on the dropdown button and highlighting the 

desired list box field or determine the depth or frequency yourself by turning 
the appropriate knob and change the signal and the effect with the sliders. 

 

Click on the 

button to play back the audio file with the changes stated. This 

allows you to check straightaway that you are happy with the results. 

4.  Click on the 'OK' button to take over the changes. 

The chorus, like the flanger creates unusual sound effects through variable 
modulation and mixing. In comparison with the flanger, the delay is longer and a 
number of delayed, i.e. modulated signals are added at the same time. By these 
means, the audio file receives a warm sound and the impression is created that 
a greater number of voices can be heard.. 

1.  Open the desired file. 

2.  Select the 'Chorus' command in the 'Effects' menu.