gml gml2032 Manual De Usuario
Note: This unit is a highly sensitive device that includes many complex circuits.
THIS UNIT CONTAINS NO USER-SERVICEABLE PARTS.
Warning: Risk of electric shock if top cover is removed.
In the event of unit operational failure, contact GML Service and Technical Support.
Refer to the "Contacts" page of this manual, or for more current contact information,
check the web site. Please be prepared to describe in detail the exact problem that the
unit is experiencing, including: failure conditions, system signal flow, exact failure
manifestation, events and actions leading to the failure, etc. Also, be able to quickly
provide contact information and the unit's GML Serial Number.
Refer to the "Contacts" page of this manual, or for more current contact information,
check the web site. Please be prepared to describe in detail the exact problem that the
unit is experiencing, including: failure conditions, system signal flow, exact failure
manifestation, events and actions leading to the failure, etc. Also, be able to quickly
provide contact information and the unit's GML Serial Number.
It is highly recommended that customers do not attempt to troubleshoot their own units
or have them serviced at unauthorized repair centers. Opening the case of the unit will
break several manufacturing seals and void the GML warranty--these security
measures cannot be readily detected nor easily thwarted, and should be respected
wholeheartedly. These measures also act to protect GML intellectual property so that
GML may continue to design high-end professional audio peripherals.
or have them serviced at unauthorized repair centers. Opening the case of the unit will
break several manufacturing seals and void the GML warranty--these security
measures cannot be readily detected nor easily thwarted, and should be respected
wholeheartedly. These measures also act to protect GML intellectual property so that
GML may continue to design high-end professional audio peripherals.
The following list of notices will help ensure the longevity of the Model 2032.
• Allow 15-20 minutes for DC servo settling after power-on. Operating the unit before the servos
settle may cause clicks and pops that can potentially damage speakers and/or other devices.
• The outputs of this unit are DC Servo stabilized, direct coupled, unbalanced and wired pin 2 “hot”.
Shorting either output (Insert Send, Output) will cause permanent damage.
• This unit contains ESD-sensitive components; handle with care.
• Provide adequate ventilation for the Model 2032. Inordinate heat buildup can cause premature
aging of the components in the unit and may lead to operational failures.
• This unit contains no user-serviceable parts: refer service to GML Service only.
• The availability of extraordinary amounts of gain throughout the Model 2032 necessitates careful
attention to the OL meter to avoid internal overload and subsequent sonic degradation.
• To avoid potentially large DC pops, switch inputs or Phantom power at minimal Gain settings.
• It is recommended that the Model 2032 be left powered-on for fixed installations. Frequent and/or
excessive power cycling may shorten the life of this unit.
• Front panel legend markings reflect approximate values, which may vary from unit to unit due to
component tolerances, environmental conditions, normal aging, etc. Frequency, gain, and Q
accuracy are not specified nor guaranteed for the Model 2032.
accuracy are not specified nor guaranteed for the Model 2032.
TROUBLESHOOTING
NOTICES