Casio EX-ZS12 Manual De Usuario
15
Quick Start Basics
To replace the battery
1.
Open the battery cover and
remove the current battery.
remove the current battery.
With the monitor screen side of
the camera facing upwards,
slide the stopper in the
direction indicated by the arrow
in the illustration. After the
battery pops out, pull it the rest
of the way out of the camera.
the camera facing upwards,
slide the stopper in the
direction indicated by the arrow
in the illustration. After the
battery pops out, pull it the rest
of the way out of the camera.
2.
Load a new battery.
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
• USB connection to a computer
.
To charge with the USB-AC adaptor
1.
Turn off the camera.
Check to make sure that the camera’s monitor screen is
blank. If it isn’t, press [ON/OFF] (Power) to turn off the
camera.
blank. If it isn’t, press [ON/OFF] (Power) to turn off the
camera.
2.
After connecting the
supplied USB cable
to the USB-AC
adaptor, plug the
power cord into a
household power
outlet.
supplied USB cable
to the USB-AC
adaptor, plug the
power cord into a
household power
outlet.
Charge the Battery
Stopper
[ON/OFF] (Power)
USB
USB-AC adaptor
Power cord
USB cable (included with camera)
USB port
Large connector