Crestron electronic TPS-6X-DS Manual De Usuario
Docking Station for the TPS-6X
Crestron TPS-6X-DS
Setup
Hardware Hookup
The only connection to the TPS-6X-DS is via the fixed cable, which is connected to
the TO PANEL port on the (included) TPS-6X-IMCW Interface Module.
the TO PANEL port on the (included) TPS-6X-IMCW Interface Module.
When connecting the TPS-6X-DS, consider the following:
• Use Crestron
®
power supplies for Crestron equipment.
• The included cable cannot be extended.
Hardware Connection for the TPS-6X-DS
TO TO PANEL
CONNECTOR ON
TPS-6X-IMCW
NOTE: The length of the connecting cable on the TPS-6X-DS is 9 feet (2.75
meters). The length of the cable has been shortened for illustrative purposes in the
diagram above.
meters). The length of the cable has been shortened for illustrative purposes in the
diagram above.
Recommended Cleaning
The TPS-6X-DS comes in a soft microfiber bag to protect it during shipping. This
can be used to clean the docking station.
can be used to clean the docking station.
6
• Docking Station for the TPS-6X: TPS-6X-DS
Operations Guide – DOC. 6576B