Crestron electronic PWE-4803RU Manual De Usuario

PoE Injector 

  Crestron PWE-4803RU 

Complete the following steps to properly set up and connect the PoE 
injector. Refer to the illustration at the conclusion of the procedure. 

1.  Attach the supplied AC power cord to the IEC 320 connector on 

the PoE injector.  

2.  Insert the other end of the power cord into an active AC receptacle. 
3.  Using a CAT5 cable, connect the LAN port of the PoE injector to 

the LAN. 

4.  Using a CAT5 cable, connect the LAN PoE port of the PoE 

injector to the PoE port of an 802.3af-compliant powered device. 

 

•  PoE Injector: PWE-4803RU