Cisco Systems 7902G Manual De Usuario
4-19
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Chapter 4 Configuring Network Settings on the Cisco IP Phone
Configuring IP Settings
Assigning a Subnet Mask
The subnet mask is used to partition the IP address into a network and a host
identifier. The subnet mask is used to mask a portion of the IP address so that
TCP/IP can distinguish the network ID from the host ID.
identifier. The subnet mask is used to mask a portion of the IP address so that
TCP/IP can distinguish the network ID from the host ID.
Before you can assign a subnet mask, you must disable DHCP. For instructions,
see the
see the
Using the Phone Configuration Web Page (Cisco IP Phone Models 7902G/7905G/7912G)
Procedure
Step 1
Open the Phone Configuration web page.
a.
Open your web browser and enter the following URL, where IPaddress is the
IP address of your phone
IP address of your phone
http://IPaddress
b.
Press Enter.
The Phone Configuration web page appears.
Step 2
In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
Step 3
To set the subnet mask, enter an address in the StaticNetMask field and click
Apply.
Apply.
On the Cisco IP Phone 7902G, you can also review phone settings using the IVR
system. See the
system. See the
.