Casio exilim ex-fh25 Manual De Usuario

62

Snapshot Tutorial

• Note the following when selecting a High Speed CS speed (fps) setting.

– Use a higher High Speed CS speed (fps) setting when shooting a fast-moving 

subject.

– Use a slower High Speed CS speed (fps) setting when shooting a slower-moving 

subject.

• Note the following when selecting a High Speed CS maximum number of shots 

setting.
– The greater the number of shots, the longer it takes to save them after shooting 

is complete.

• Note the following when specifying a Prerecord CS shots setting.

– A setting that results in a Prerecord CS operation that takes at least 0.3 seconds 

is recommended because there is a minimal lag from about 0.1 seconds to 0.3 
seconds between the point you decide to shoot and the point that the shutter 
button is fully depressed.

You can specify the method to use for saving images recorded with the following 
continuous shutter (CS) modes.
Flash CS, High Speed CS

Use [4] and [6] to select the “REC” tab.

Use [8] and [2] to select “Save CS Images”, and then press [6].

Use [8] and [2] to change the setting.

All images that were shot are saved after the continuous shutter operation is 
finished.