Casio XJ-A241 Manual De Usuario

POWER

: Amber flashing J 

Amber steady

Power has turned off automatically due to internal overheating. Perform 
the following steps.

1 Check for any blocking of the projector’s intake vents and exhaust 

vents, and make sure that there is sufficient space around the 
projector. See 

“

Setup Precautions” (page 10).

2 If there is dust accumulated around the intake vents and/or exhaust 

vents, remove it. See 

Cleaning the Projector” (page 43).

If there is no problem with the projector’s vents, confirm that the POWER/
STANDBY indicator is lit amber (without flashing), and then turn power 
back on again. If the error occurs again when you turn power back on, 
contact your retailer or nearest authorized CASIO Service Center.

LIGHT

: –

TEMP

: –

Message

: Internal temperature is too 

high. The projector will 
turn off.

POWER

: Amber flashing J 

Red steady

Power has turned off automatically due to internal overheating. This 
causes a dialog box containing the text in the next item below to appear 
the next time you turn on the projector. Follow the steps that are 
provided.

LIGHT

: –

TEMP

: Red flashing 

(0.5-second interval)

Message

: –

POWER

: Green steady

The last time you were using the projector, power turned off automatically 
due to internal overheating. Press the [ESC] key to clear the warning 
message and perform the following steps.

1 Check for any blocking of the projector’s intake vents and exhaust 

vents, and make sure that there is sufficient space around the 
projector. See 

“

Setup Precautions” (page 10).

2 If there is dust accumulated around the intake vents and/or exhaust 

vents, turn off the projector and remove it. See 

“

Projector” (page 43).

3 Disconnect the power cord from the projector and wait for all of the 

projector’s indicators to go out. Next, reconnect the power cord and 
turn the projector back on. If the error occurs again when you turn 
power back on, contact your retailer or nearest authorized CASIO 
Service Center.

LIGHT

: –

TEMP

: –

Message

: The projector has a 

history of turning off due 
to high temperature. 
Check air vents for 
blockage.

POWER

: Amber flashing J 

Red steady

Power has turned off automatically due to a fan problem. Confirm that the 
POWER/STANDBY indicator is lit red (without flashing) and that the fan 
has stopped. After checking the POWER/STANDBY indicator, disconnect 
the power cord from the projector and wait for all of the projector’s 
indicators to go out. Next, reconnect the power cord and turn projector 
power back on.
If the error occurs again when you turn power back on, contact your 
retailer or nearest authorized CASIO Service Center.

LIGHT

: Red steady

TEMP

: Red steady

Message

: There is a problem with 

the fan. The projector will 
turn off.

POWER

: Amber flashing J 

Red steady

Power has turned off automatically due to a system problem. After 
confirming that the POWER/STANDBY indicator is lit red (without 
flashing), disconnect the power cord from the projector and wait for all of 
the projector’s indicators to go out. Next, reconnect the power cord and 
turn the projector back on.
If the error occurs again when you turn power back on, contact your 
retailer or nearest authorized CASIO Service Center.

LIGHT

: –

TEMP

: Red steady

Message

: A system problem has 

occurred. The projector 
will turn off.