Casio exilim ex-z19 Manual De Usuario

39

Recording Movie Images and Audio

The length of the movie you can record will depend on the quality setting you 
select.

Use [8], [2], [4], and [6] to select the » 
(Movie) scene and then press [SET].

This causes » to appear on the monitor screen.

This will start recording and display Y on the 
monitor screen.
Movie recording includes monaural audio.

• Each movie can be up to 10 minutes long. Movie recording stops automatically 

after 10 minutes of recording. Movie recording also will stop automatically if 
memory becomes full before you stop movie recording by pressing the shutter 
button.

• Spending a long time using movie recording will cause the camera to become 

slightly warm to the touch. This is normal and does not indicate malfunction.

• The camera also records audio. Note the following points when shooting a movie.

– Take care that the microphone is not blocked by your fingers, 

etc.

– Good recording results are not possible when the camera is too 

far away from what you are trying to record.

– Operating camera buttons while shooting can cause button 

noise to be picked up in the audio.

• Shooting a very bright subject can cause a vertical band to 

appear in the monitor screen image. This does not indicate 
malfunction. The band will not be recorded in a snapshot, but will be recorded in 
the case of a movie.

• Use of certain types of memory cards increase the time it takes to record movies, 

which can cause movie frames to be lost. This condition is indicated by » and Y 
flashing on the monitor screen. To avoid loss of movie frames, use of a memory 
card with a maximum transfer speed of at least 10MB per second is recommended.

Recording time

Remaining recording time

Microphone