Cisco Systems ata 186 Manual De Usuario
5-26
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)
OL-4804-01
Chapter 5 Parameters and Defaults
Operational Parameters
TOS
Description
This parameter allows you to configure Type of Service (ToS) bits by specifying the precedence and
delay of audio and signaling IP packets, as follows:
delay of audio and signaling IP packets, as follows:
•
Bits 0-7—These bits are for the ToS value for voice data packets.
Range: 0-255
Default: 184
•
Bits 8-15—These bits are for the ToS value for signaling-data packets
Range: 0-255
Default: 168
•
Bits 16-31—Reserved.
Value Type
Bitmap
Default
0x0000A8B8
Voice Configuration Menu Access Code
255
Note
This parameter is called UDPTOS in previous Cisco ATA releases. If you are performing a Cisco ATA
upgrade, the previous value of the UDPTOS parameter is carried forward to the TOS parameter.
upgrade, the previous value of the UDPTOS parameter is carried forward to the TOS parameter.
Operational Parameters
This section describes the following parameters, which allow you to configure such items as call features
and various timeout values:
and various timeout values:
•
•
•
•
•
•
•
•
•