Burley solo jogger Manual De Usuario
3
Burley Solo Jogger Manual
PUTTING YOUR JOGGER ON YOUR TRAILER:
Only install the jogger when the trailer is empty. Engage the parking brake
on your trailer and detach the trailer tongue.
Only install the jogger when the trailer is empty. Engage the parking brake
on your trailer and detach the trailer tongue.
A. Remove the right
front bolt on your trailer.
replace the bolt with a
new tongue receptacle
(open side facing down).
Use a properly fi tting
screwdriver and about
70-in.-lbs torque or use a
threadlocking compound.
front bolt on your trailer.
replace the bolt with a
new tongue receptacle
(open side facing down).
Use a properly fi tting
screwdriver and about
70-in.-lbs torque or use a
threadlocking compound.
B. Find the second hole in the trailer frame (about 9.5” behind the fi rst
hole). Make a hole in the fabric usng a drill or a screwdriver. Bolt the tongue
receptacle into the frame with the nut provided (open side facing up).
hole). Make a hole in the fabric usng a drill or a screwdriver. Bolt the tongue
receptacle into the frame with the nut provided (open side facing up).
1. The brake should be oriented on the bottom of the jogger, with the pads
towards the wheel dropouts.
2. Position the left jogger arm and insert it on the pivot pin as shown.
towards the wheel dropouts.
2. Position the left jogger arm and insert it on the pivot pin as shown.
3. Align both the right and left jogger arms with the tongue receptacles.
4. Rotate the two arms until they snap securely in place.
Secure the left jogger arm by pushing
the lockpin fully into the front tongue
receptacle. Anchor the lockpin by
inserting the hairpin cotter all the way
in to the hole in the lock pin.
the lockpin fully into the front tongue
receptacle. Anchor the lockpin by
inserting the hairpin cotter all the way
in to the hole in the lock pin.
A
B
1
2
3
4
Hairpin Cotter