Casio exilim k1160pcm2dmx Manual De Usuario

106

Printing

You can connect the camera directly to a printer that supports PictBridge and print 
images without going through a computer.

.

On the “Set Up” tab, select “USB” and then press [6].

Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].

.

Use the USB cable that comes bundled with the camera to connect the camera to 
your printer’s USB port.

• The camera does not draw power over the USB cable. Check the battery level 

before connecting and make sure it is not too low.

• Make sure that you insert the cable connector into the USB/AV port until you feel it 

click securely into place. Failure to insert the connector fully can result in poor 
communication or malfunction.

• Note that even while the connector is fully inserted, you still will be 

able to see the metal part of the connector as shown in the 
illustration.

• When connecting the USB cable to a USB port, make sure you 

align the connector correctly with the port.

• Make sure that the camera is turned off before plugging in or unplugging the cable. 

Check the user documentation that comes with the printer for information about 
requirements before plugging into or unplugging from the printer.

USB

USB cable

USB port

USB/AV port

Making sure that the 6 mark on the camera is 
aligned with the 4 mark of the USB cable 
connector, connect the cable to the camera.

Large 
connector

Small connector