Casio 5213 Manual De Usuario

Operation Guide 5113 5213

•

 The illustration below shows which buttons you need to press to navigate between modes.

•

 To return to the Timekeeping Mode from any other mode, hold down

D for about two seconds. 

•

 In any mode, press

L to illuminate the display.

•

 You can use buttons

A, B, and C to enter a sensor mode directly from the Timekeeping Mode or 

from another sensor mode. To enter a sensor mode from the Data Recall, Stopwatch, Countdown 
Timer, Alarm, World Time, or Hand Home Position Adjustment Mode, fi rst enter the Timekeeping Mode 
and then press the applicable button.

•

 The hour and minute hands indicate the current time in all modes. In the Timekeeping, Data Recall, 

Stopwatch, Countdown Timer, and Alarm modes, the second hand indicates the current (Timekeeping 
Mode) second. The second hand performs other operations in the other modes. 

General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.

•

 The watch returns to the Timekeeping Mode automatically if you do not perform any button operation 

for two or three minutes in the Data Recall, Alarm, or Hand Home Position Adjustment Mode. 

•

 If you leave a screen with fl ashing digits on the digital display for two or three minutes without 

performing any operation, the watch exits the setting screen automatically.

Initial Screens
When you enter the Data Recall, World Time, Alarm, Compass, or Barometer/Thermometer Mode, the 
data you were viewing when you last exited the mode appears fi rst.

Scrolling
The

A and C buttons are used to scroll through settings on the digital display while a setting screen is 

displayed, and to move the hands of the watch manually. In most cases, holding down either of these 
buttons will perform its operation at high speed. 

Use the Timekeeping Mode ( HOME) to set and view the current time and date. 

•

 In the Timekeeping Mode, press

E to toggle the digital display between the day of the week and the 

barometric pressure graph.

There are two Home City settings: selecting the Home City, and specifying either standard time or daylight 
saving time (DST).

To confi gure Home City settings
1. In the Timekeeping Mode, hold down

E until each of the following 

steps occurs. 

 • 

Hold SET  appears on the digital display.  

➝ HT  fl ashes.  ➝  Second 

hand points to the current Home City code.

 • 

 For information about city codes, see the “City Code Table” at the 

back of this manual.

2. To change the Home City code setting, press

A to move the second 

hand clockwise. 

 • 

 Keep pressing  

A until the second hand is pointing to the city code 

you want to select as your Home City.

 • 

The current time in the time zone of the currently selected city code is 

shown on the digital display.

3. Press

D. This will display the DST setting screen on the digital 

display.

4. Press

A to toggle the DST setting between Daylight Saving Time ( On)

and standard time ( OFF).

 • 

 Note that you cannot switch between standard time and daylight 

saving time (DST) while UTC is selected as your Home City.

5. After all the settings are the way you want, press

E to return to the Timekeeping Mode. 

 • 

 The hands of the watch will move the current time in the zone where the city code you selected as 

your Home City is located. Do not perform any operation on the watch while the hands are moving. 

 • 

 If Daylight Saving Time is selected, the  dSt  indicator will be on the digital display.

 • 

 After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate the 

current time for other time zones based on the current time in your Home City.

1. In the Timekeeping Mode, hold down

E until each of the following 

steps occurs. 

 • 

Hold SET  appears on the digital display.  

➝ HT  fl ashes.  ➝  Second 

hand points to the current Home City code.

2. Press

D. This will display the DST setting screen on the digital 

display.

3. Press

A to toggle the DST setting between Daylight Saving Time ( On)

and standard time ( OFF).

4. After all the settings are the way you want, press

E to exit the setting screen. 

 • 

 The  dSt  indicator indicates that Daylight Saving Time is selected.

You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.

1. In the Timekeeping Mode, hold down

E until each of the following 

steps occurs. 

 • 

Hold SET  appears on the digital display.  

➝ HT  fl ashes.  ➝  Second 

hand points to the current Home City code.

2. Use

A to select the city code you want to select as your Home City. 

 • 

 Each press of  

A moves the second hand clockwise. Keep pressing 

A until the second hand is pointed at the city code you want to 
select.

 • 

 Select your Home City code before changing any other setting.

 • 

 For full information about city codes, see the “City Code Table” at the 

back of this manual.

3. Press

D to cycle through the available settings on the digital display in the sequence shown below.

Thermometer/Barometer/
Altitude unit

Auto Light 
On/Off

Illumination
Duration

Button Operation 
Tone On/Off

Day

Month

City Code

DST

12/24-Hour
Format

Seconds

Hour

Minute

Year

 • 

 The following steps explain how to confi gure timekeeping settings only.

4. When the timekeeping setting you want to change is displayed, use

A and/or C to change it as 

described below.

Change the city code 

 Press

A.

Toggle between Daylight Saving Time ( On) and 
Standard Time ( OFF).

Press

A.

Toggle between 12-hour ( 12H) and 24-hour ( 24H)
timekeeping.

Press

A.

Reset the seconds to 00

Press

A.

Change the hour or minute 

 Use

A (+) and C (–).