Casio XJ-S35 Manual De Usuario

A message like “Wireless Connection.exe is trying to access the Internet” may appear 
when the computer you are using has security software installed. If this happens, select 
“Always allow (access)” on the dialog box. 

z This will close the Wireless Connection window and terminate the connection between the 

computer and Data Projector. At this time, the projected image will return to the 
message in step 2 of this procedure.

The above procedure will not establish a wireless LAN connection if the connection 
profile of the Data Projector is different from the profile used the first time a connection 
was established between the computer and Data Projector (Simple Connection 1 in this 
example). In this case, press the Data Projector’s remote controller [

…] key to display 

the “Connection Profile” menu and then select the original connection profile (Simple 
Connection 1 for this example). For details, see “To switch the Data Projector 
connection profile” (page 69).

This section explains how to connect up to four computers to a single Data Projector (over 
a wireless LAN access point) at the same time. The following are the general steps that 
are required.

1

Prepare for wireless LAN connection of the Data Projector and the computers (below).

2

Create connection profiles for the computers (page 56).

3

Use the Manual Connection profile to establish a wireless LAN connection between the 
first computer and the Data Projector (page 58).

4

Use the Manual Connection profile to establish a wireless LAN connection between the 
other computers and the Data Projector (page 63).

1