CyberData Part #010861 Manual De Usuario

CyberData Corporation

930106C

VoIP Loudspeaker Amplifier Operations Guide

 Installing the VoIP Loudspeaker Amplifier

 

Configure the Loudspeaker Amplifier Parameters

18

3. After changing the parameters, click Save Settings.

2.3.4 Configure the SIP Parameters

1. Click SIP Setup to open the SIP Setup page (

For specific server configurations, go to the following URL:

http://www.CyberData.net/support/voip

Click on this button to save your configuration settings. 
Changing a parameter that has an asterisk next to it will 
cause a system reboot when saved.

Click on this button to do an audio test. Generates a voice 
message for testing the speaker audio quality and volume.

Link to the Network Setup page.

Link to the SIP Setup page.

Link to the MGROUPS Setup page.

Link to the Upgrade Firmware page.

Link to the Home Page page.

a.If you select No for RTFM Announcement, you will not hear a beep or associated RTFM audio. 
However, the return to default settings function remains active. If you wish to return to default 
settings, hold the RTFM button at least 20 seconds, then release the button.