Cadillac seville 2002 Manual De Usuario

Descargar
Página de 399
6-29
Windshield Washer Fluid
What to Use
When you need windshield washer fluid, be sure to read
the manufacturer’s instructions before use. If you will be
operating your vehicle in an area where the temperature
may fall below freezing, use a fluid that has sufficient
protection against freezing. See “Engine Compartment
Overview” in the Index for reservoir location.
Adding Washer Fluid
When your vehicle’s windshield washer fluid level
becomes low, a CHECK WASHER FLUID message will
appear on the Driver Information Center (DIC). You will
need to add fluid soon.
The windshield washer 
fluid reservoir is located
next to the underhood fuse
block on the passenger’s
side of the vehicle.
Open the cap with the washer symbol on it. 
Add washer fluid until the tank is full.
NOTICE:
When using concentrated washer fluid,
follow the manufacturer’s instructions for
adding water.
Don’t mix water with ready
-
to
-
use washer
fluid. Water can cause the solution to freeze
and damage your washer fluid tank and
other parts of the washer system. Also,
water doesn’t clean as well as washer fluid.
Fill your washer fluid tank only
three
-
quarters full when it’s very cold. 
This allows for expansion if freezing 
occurs, which could damage the tank if 
it is completely full.
Don’t use engine coolant (antifreeze) in
your windshield washer. It can damage
your washer system and paint.